Aiwa HV-FX8100U Instrucciones De Manejo página 19

5
Set DAY, YEAR and hours in the same way as
in step 4.
Press and hold SET/TRACKING + or – to change the
setting rapidly.
6
Press SET/TRACKING + or – to set the minutes.
To change the minutes setting in ten minutes, press and
hold SET/TRACKING + or – .
7
Press ENTER to start the clock.
The normal screen returns.
To correct the digits while setting
Before pressing ENTER in step 7, press CHANNEL N or
M repeatedly until the item you want to correct flashes.
Reset the digits using the SET/TRACKING + or – button.
Then finish the procedure in step 7.
Tip
When the power supply is interrupted or the AC cord is
disconnected from the AC wall outlet for more than 5 seconds,
the clock setting is cleared. In this case, you have to set the
clock again.
Note
The date can be set from A.D.1990 to A.D. 2081.
Setting the Auto Clock
The unit automatically corrects the clock setting once you
set AUTO CLOCK to ON. After unpacking the VCR, AUTO
CLOCK is set to ON.
If AUTO CLOCK is set to OFF, follow the procedures below.
1
Press MENU.
2
Press SET/TRACKING + or – to select SYSTEM SET
UP, then press ENTER.
M E N U
T I M E R R E C S E T
C H S E T U P
V C R S E T U P
S Y S T E M S E T U P
N O N O I S E B AC K G RO U N D
O N O F F
3
Press SET/TRACKING + or – to select AUTO CLOCK.
S Y S T E M S E T- U P
C L O C K S E T
LANGUAGE/IDIOMA/LANGUE
AU TO C L O C K
S TA N DA R D T I M E
DAY L I G H T S AV I N G T I M E
4
Press ENTER to select ON.
S Y S T E M S E T- U P
C L O C K S E T
LANGUAGE/IDIOMA/LANGUE
AU TO C L O C K
S TA N DA R D T I M E
DAY L I G H T S AV I N G T I M E
5
Press MENU twice to return to the normal screen.
Setting the time with the daylight
saving time
1
Press MENU.
2
Press SET/TRACKING + or – to select SYSTEM SET
UP, then press ENTER.
M E N U
T I M E R R E C S E T
C H S E T U P
V C R S E T U P
S Y S T E M S E T U P
N O N O I S E B AC K G RO U N D
3
Press SET/TRACKING + or – to select DAYLIGHT
SAVING TIME, then press ENTER.
S Y S T E M S E T U P
C L O C K S E T
LANGUAGE/IDIOMA/LANGUE
AU TO C L O C K
S TA N DA R D T I M E
DAY L I G H T S AV I N G T I M E
4
Press SET/TRACKING + or – to select AUTO, then
press ENTER.
Normally the AUTO setting is sufficient. If you set it to
ON, you can advance the time by one hour manually .
5
Press MENU twice to return to the normal screen.
O N O F F
O N O F F
ON OFF
O N O F F
CONTINUE
12
ENGLISH