1byone simple taste 706NA-0002 Manual De Instrucciones página 5

4. Pour milk into the jug. When using the frothing whisk, do not exceed
EN
the frothing maximum level
DE
using the stirring whisk, do not exceed the stirring maximum level
FR
shown on the inside of the jug.
ES
Place the lid back on the jug and select your preferred frothing
program. See the next section of the manual for more details.
IT
Using the Frothing Programs
1. To heat and froth, first make sure the stirring arm and frothing
whisk are properly connected together and placed in the jug. Press
the Power/Function Button once to start the heating and frothing
program. The Power/Function button will illuminate red when
pressed and heating and frothing will begin.
2. It takes approximately 2 minutes to heat and froth your milk to a
temperature of 65ºC (149ºF). The frother will automatically switch off
once this heating and frothing program is finished.
It is recommended to rinse the jug immediately after each use.
Always clean the jug before using again.
6
shown on the inside of the jug. When
4
1
x1 press.
Red light.
2
Approx.
2 mins to 65°C
3. To stop the heating and frothing program mid-cycle, press the
Power/Function button during the program's cycle. Please note that
the heating and frothing program can only be restarted again after a
30 second wait. To continue the heating and frothing program, press
the Power/Function button.
4. For cold frothing, make sure the frothing whisk and stirring arm and
properly connected together and placed inside the jug. Double
press the Power/Function button. The button will illuminate blue and
begin frothing. To cancel the program mid-cycle, press the Power/
Function button during the program's cycle. Please note that the
program can only be continued after 30 seconds by pressing the
Power/Function button.
Preparing Hot Chocolate and Milkshakes
• To prepare hot chocolate and cold flavored milk drinks, follow steps
1- 4 in the "Using Your Milk Frother" Section. Make sure the frothing
whisk is removed and stored on the lid as shown in this manual.
• Pour the milk into the jug and add hot chocolate powder/milkshake
syrup.
• Place the lid securely on the jug. For hot chocolate, press the Power/
Function button once for the heating program. For milkshakes,
double press the Power/Function button for the cold program.
• The frother will switch off automatically when finished. For hot
chocolate, allow 30 seconds to cool before pouring it out. Always
clean your milk frother before using again.
3
x1 press.
Wait 30 secs
before restart.
4
x2 press.
Blue light.
7
EN
DE
FR
ES
IT