blower tubes. When using the op-
tional vacuum
kit, always install vac-
uum tubes and vacuum
bag assem-
bly. Make sure vacuum
bag assem-
bly is completely
zipped.
• Check air intake opening,
blower
tubes, and vacuum
tubes frequently,
always with engine stopped and
spark plug disconnected.
Keep vents
and discharge
tubes free of debris
which can accumulate
and restrict
proper air flow.
• Never place any object in air intake
opening as this could restrict proper air
flow and cause damage to the unit.
• Never use for spreading
chemicals,
fertilizers,
or other substances
which
may contain toxic materials.
• To avoid spreading fire, do not use
near leaf or brush fires, fireplaces,
barbecue
pits, ashtrays,
etc.
• Use only for jobs explained
in this
manual.
MAINTAIN
YOUR UNIT PROPERLY
_,WARNING:
Disconnect
spark
plug before performing
maintenance
except for carburetor
adjustments.
• Have all maintenance
other than the
recommended
procedures
described
in the instruction
manual performed
by a Sears Service Center.
• Use only recommended
Craftsman
replacement
parts; use of any other
parts may void your warranty and
cause damage to your unit.
• Empty fuel tank before storing the
unit. Use up fuel left in carburetor
by
starting engine and letting it run until
it stops.
• Do not use any accessory or attach-
ment other than those recommended
by manufacturer for use with your unit.
• Do not store the unit or fuel in a closed
area where fuel vapors can reach
sparks or an open flame from hot
water heaters, electric motors or
switches, furnaces, etc.
• Store in a dry area out of reach of
children.
SAFETY
NOTICE:
Exposure
to vibra-
tions through prolonged
use of gaso-
line powered hand tools could cause
blood vessel or nerve damage
in the
fingers, hands, and joints of people
prone to circulation
disorders
or abnor-
mal swelling.
Prolonged
use in cold
weather
has been linked to blood ves-
sel damage
in otherwise
healthy
people. If symptoms
occur such as
numbness,
pain, loss of strength,
change in skin color or texture, or loss
of feeling in the fingers, hands, or
joints, discontinue
the use of this tool
and seek medical attention. An
antivibration
system does not guaran-
tee the avoidance
of these problems.
Users who operate power tools on a
continual and regular basis must moni-
tor closely their physical condition
and
the condition of this tool.
SPECIAL
NOTICE: This unit is
equipped with a temperature
limiting
muffler and spark arresting
screen
which meets the requirements
of Cali-
fornia Codes 4442 and 4443.
All U.S.
forest land and the states of California,
Idaho, Maine, Minnesota,
New Jersey,
Oregon, and Washington
require by
law that many internal combustion
en-
gines be equipped with a spark arrest-
ing screen.
If you operate in a locale
where such regulations
exist, you are
legally responsible
for maintaining
the
operating
condition of these parts. Fail-
ure to do so is a violation of the law.
Refer to the MAINTENANCE section for
information
on maintenance
of the
muffler and spark arresting
screen.
CARTON
CONTENTS
Check carton contents
against the fol-
lowing list.
Model 358.794761
• Blower
• Upper blower tube
• Lower blower tube
• High velocity
nozzle
• Elbow tube
• Vacuum bag
• Upper vacuum
tube
• Lower vacuum
tube
• 2-Cycle engine oil
NOTE: It is normal for the fuel filter to
rattle in the empty fuel tank.
ASSEMBLY
_WARNING:
Stop engine and be
sure the impeller blades have stopped
turning before opening the vacuum
in-
let door or attempting
to insert or re-
move the vacuum
tubes, The rotating
blades can cause serious
injury.
-5-