Remote Control - Samsung HP-T4254 Manual Del Usuario

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always
point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player,
or Set-Top Box.
RETURN
FAV.CH
This is a special remote control for
➢
the visually impaired, and has Braille
points on the POWER, Channel,
Volume, STOP, and PLAY/PAUSE
buttons.
The performance of the remote control
➢
may be affected by bright light.
1 POWER
Turns the TV on and off.
2 NUMERIC BUTTONS
Press to directly select a channel.
3 –
Press to select additional channels
(digital and analog) being broadcast
by the same station. For example,
to select channel "54-3", press "54",
then press "–" and "3".
4 CH LIST
Used to display Channel Lists on the
screen.
5 ANTENNA
Press to select "AIR" or "CABLE".
6 VCR/DVD Functions
- Rewind
- Stop
- Play/Pause
- Fast/Forward
7 + VOL –
Press to increase or decrease the
volume.
8 MUTE
Press to temporarily cut off the
sound.
9 MENU
Displays the main on-screen menu.
0 S.MODE
Press to select the sound mode.
! RETURN
Returns to the previous menu.
@ P.MODE
Press to select the picture mode.
# CAPTION
Controls the caption decoder.
$ FAV.CH
Press to switch to your favorite
channels.
% SLEEP
Press to select a preset time interval
for automatic shut off.
^ SRS
Selects SRS TruSurround XT mode.
& SET
Sets the remote to control your TV,
VCR, Cable, DVD, or Set-Top Box.
* TV/DVD/STB/CABLE/VCR
Press to operate your TV, DVD, STB,
CABLE (box), or VCR.
English - 8
(
Press to backlight the VOL, CH,
and active source button (TV, DVD,
CABLE, STB, VCR) on the remote.
) SOURCE
Press to display all of the available
video sources.
a PRE-CH
Tunes to the previous channel.
b WISELINK
Not available.
c REC
This remote can be used to control
recording on Samsung recorders.
(Refer to page 64)
CH
d
Press to change channels.
e EXIT
Press to exit the menu.
f UP▲/DOWN▼/LEFT◄/
RIGHT►/ENTER
Use to select on-screen menu items
and change menu values.
g INFO
Press to display information on the
TV screen.
h Anynet+
Runs the Anynet+ view functions and
sets up Anynet+ devices.
i STILL
Press to stop the action during a
particular scene. Press again to
resume normal video.
j P.SIZE
Press to change the screen size.
k PIP
Picture-in Picture ON/OFF.
l CH /
Displays the available channels in
sequence. (These buttons change
channels in the PIP window only.)
m MTS
Press to choose stereo, mono or
Separate Audio Program (SAP
broadcast).
n RESET
When your remote does not work,
change the batteries and press
the RESET button for 2-3 seconds
before use.