Tabla de contenido
Idiomas disponibles
Idiomas disponibles
DIFFICULTY PROGRAMMING RECEIVERS
If you are experiencing problems when programming the BULB RECEIVER or OUTDOOR LAMP RECEIVER, it may be due to electrical
interference on the power lines caused by large appliances such as refrigerators or TV's. To avoid the interference, move the RECEIVER and
the MESSENGER HUB while it is being programmed to a different wall outlet that is further away from large appliances.
SOME RECEIVERS DON'T RESPOND
Most houses are fed from a 240 volt service which is then split into two phases of 120 volts each in the circuit breaker panel. The most
commonly encountered problem with systems which use the existing house wiring to transmit signals is that the signals are received by some
Receivers, but not by others. For example, the MESSENGER HUB controls some lights but not others or controls some lights intermittently.
This can happen sometimes when the Receiver to be controlled is on the opposite phase of the house wiring to the phase which the
MESSENGER HUB is connected to.
If some of the Receivers are not working it may be necessary to:
• move the Receiver to a different wall outlet to test that it works.If it still doesn't work:
• move the Receiver to a different room. If it still doesn't work:
• move the Receiver to the closest outlet that the MESSENGER HUB is plugged into or move the MESSENGER HUB to the closest
outlet to the Receiver that is not working.
RECEIVERS TURN ON BY THEMSELVES
If it is suspected that Receivers have turned on or off by themselves, it is possible that a neighbor has a FREEWIRE or compatible system,
which could result in unexpected operation of both systems. Unplug all FREEWIRE devices immediately until (1) the interference is identified
and eliminated through selection of a different HOUSE CODE to ensure that neither system causes unintended operation of the other system
or (2) a blocking filter, Black and Decker Model number PZZ01, is installed. Call 1-888-678-7278 to order. Professional installation
recommended. If you cannot identify the source of interference by talking with neighbors who are using a FREEWIRE or compatible system
and you do not want to install a blocking filter, or if you have any questions about identifying or eliminating interference, please call 1-800-544-
6986 before plugging in or using any FREEWIRE device.
THREE WAY BULBS
Three way bulbs may be used, however, only one level of brightness can be activated using the Freewire system. To change brightness level
you will need to turn the switch at the lamp to the desired level of brightness. NOTE: When using the BULB RECEIVER, you cannot control the
lamp by the lamp's switch. Turning the lamp switch off and then sending a Freewire signal within 30 seconds of power being applied to the
lamp, will cause the BULB RECEIVER to go into program mode and will need to be reprogrammed. See BULB RECEIVER section / manual.
INTERCOM AND MONITORING SYSTEMS
Intercom and monitoring systems, including baby monitors, that use the house wiring to transmit signals can "block out" FREEWIRE
transmissions while the intercom or monitoring system is in "permanent transmit" or "talk" mode. It is NOT possible to have a wireless
intercom or monitoring system and a MESSENGER HUB operating in the same house. It is possible that a neighbor's wireless intercom or
monitoring system could cause unexpected operation, including failure to operate, of your FREEWIRE system, or that your FREEWIRE
SYSTEM could cause unexpected operation, including failure to operate, of your neighbors intercom or monitoring system.
KEY CHAIN REMOTE RANGE OF USE
Placing the MESSENGER HUB on the inside wall closest to driveway or entry way, will often maximize range of KEY CHAIN REMOTE.
MAINTENANCE
Use only mild soap and damp cloth to clean the product. Never let any liquid get inside the product; never immerse any part of the product into
a liquid. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to various types of commercial solvents and may be
damaged by their use.
ACCESSORIES
Recommended accessories for use with your product are available from your local dealer or authorized service center. If you need assistance
regarding accessories, please call: 1-800-544-6986.
WARNING: The use of any accessory not recommended for use with this product could be hazardous.
SERVICE INFORMATION
Black & Decker offers a full network of company-owned and authorized service locations throughout North America. All Black & Decker Service
Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical
advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. To find your local service location, refer
to the yellow page directory under "Tools—Electric" or call: 1-800-544-6986.
FULL TWO-YEAR HOME USE WARRANTY
Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be
replaced or repaired at no charge in either of two ways.
The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a
participating retailer). Returns should be made within the time period of the retailer's policy for exchanges (usually 30 to 90 days after the
sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the
time set for exchanges.
The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized Service Center for repair or replacement
at our option. Proof of purchase may be required. Black & Decker owned and authorized Service Centers are listed under "Tools-Electric" in
the yellow pages of the phone directory.
This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from
province to province. Should you have any questions, contact the manager of your nearest Black & Decker Service Center.
TROUBLESHOOTING
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
See 'Tools-Electric'
– Yellow Pages –
for Service & Sales
Tabla de contenido
