Mustang Fender GT40 Manual Instrucciones De Uso página 9

Once in the CONTROLS LAYER, turn and press the ENCODER to scroll through and select a specific digital
amp control knob. Then turn the ENCODER again to change that control's setting. When a control setting is
changed, the box containing the preset number changes from blue to red (indicating that a preset edit has
been made), and the SAVE utility button illuminates. With the new control setting in place, further edits can
then be made or the SAVE utility button can be pressed to keep completed edits (see illustrations below).
Turn the ENCODER again to adjust the selected amp model control knob to preference.
Additional amp and control settings can be found by continuing to scroll through the CONTROLS LAYER of
various amp models within the presets. These consist of "deeper" parameters including sag, bias and gate
controls. Different speaker cabinet models are also included. Scroll through, select, adjust and save these
additional parameters in the same manner described directly above (see illustrations below).
ROCK & ROLL
AMPLIFIER
TWIN
FUZZ
REVERB
'65
OFF
TWIN
CAB
GATE
Close-up detail showing additional amp and con-
trol settings found in the CONTROLS LAYER; in this
case for the Twin Reverb amp model.
ROCK & ROLL
AMPLIFIER
TWIN
FUZZ REVERB
REVERB
Turn the ENCODER to scroll among amp model control knobs.
ROCK & ROLL
AMPLIFIER
TWIN
FUZZ REVERB
REVERB
Press the ENCODER to select an amp model control knob for adjustment.
ROCK & ROLL
AMPLIFIER
TWIN
FUZZ REVERB
REVERB
REVERB
PRE MATCH 0.0%
POS SAG BIAS
ROCK & ROLL
AMPLIFIER
TWIN
FUZZ REVERB
REVERB
'65
TWIN OFF PRE MATCH 0.0%
CAB
GATE POS SAG BIAS
Scroll among, select and adjust additional CONTROLS LAYER amp
and control settings using the ENCODER.
7