Tabla de contenido
Operation
5.10
SPOKES OFF AUTOMATIC
1
Mode "BALANCE NO SPOKES"
The Spokes Off Automatic Mode has the same features
as the Automatic function already described (
5.9),
except that it excludes automatic rim spoke detection.
When it is established that no information about spokes
is needed, in-depth spoke detection by the laser can
2
be switched off.
This noticeably reduces the overall measuring run time.
After the measuring run the condition is identified by
the pair of symbols (2, Fig. 5-26);
- Automatic "BALANCING"
- Rim with question mark
5-26
82
Tabla de contenido
