Normal Operation - SATA clean RCS Serie Instrucciones De Servicio

Operating Instructions for SATA RCS
US
■ Connect compressed air line to air inlet [1-1] / [2-1] / [3-1].
Optional for all variants
■ Install ball valve to shut off compressed air during maintenance work
on air inlet [1-1] / [2-1] / [3-1].
■ Connect exhaust hose from exhaust system to connection for extrac-
tion [1-13] / [2-14] / [3-15].

10. Normal Operation

Notice!
Damage due to use of the wrong type of cleaning agent
Use of aggressive cleaning agents can damage the SATA cleaning sys-
tems.
→ Do not use aggressive cleaning agents.
→ Use a neutral cleaning agent with a pH value of 6 – 8.
→ Do not use acids, alkalis, bases, paint stripper, unsuitable regener-
ates or other aggressive cleaning agents.
Information!
To prevent overflowing the receiver tank [1-10] / [2-10] / [3-11], check the
fill level regularly and empty at least by the end of the shift.
Information!
USA / Canada: close suction tank [1-9] / [2-9] / [3-9] and receiver tank
[1-10] / [2-10] / [3-11] while painting. Empty and close suction tank
[1-9] / [2-9] / [3-9] and receiver tank [1-10] / [2-10] / [3-11] after work is
completed.
Information!
As an option, the SATA RPS cup systems can be used as receiver tanks
for SATA clean RCS devices.
Information!
Read and follow instructions on inside of cover plate [1-11] / [2-11] / [3-12].
426