Power Source; Battery Operation - König HAV-PR31 Manual De Uso

POWER SOURCE

Battery Operation

1. Open the battery compartment.
2. Correctly Insert 3 "AA" size batteries.
To prevent possible damage make sure you:
• Insert batteries according to the indicated polarity
• Do not apply heat to the batteries
• Remove the batteries if you are not going to use the radio for a long time
• Remove empty batteries immediately
• Do not use old and new batteries together
To Use AC Adapter
Connect the plug to the radio and the schuko plug to an AC wall outlet. The DC
input is 4.5 V outer + inner –.
Clock Function
1. To set the time press the "POWER" button to go into standby mode.
2. Press "TIME/SET/MEMORY" and use the "HOUR/+" and "MIN/–" to set the
correct time.
3. After you are finished press the "TIME/SET/MEMORY" button again to save
the settings.
4. Press "MODE" to view the time on the display.
Radio Operation
1. Move the lock switch to the UP position.
2. Turn on the radio with the "POWER" button.
3. Adjust the volume with the "VOLUME +/–" button.
4. Select the desired band using the "BAND/WAKE" button.
5. Tune to the desired station using the "HOUR/+" or "MIN/–" buttons. The
frequency is displayed on the display.
6. To improve reception, move the antenna.
7. To switch off the radio use the "POWER" button.
Headphone
If you want to listen via a headphone, lower the volume, connect the
headphone and set the volume to the desired level again.
NOTE: When the received signal is weak, or the batteries are low, the FM ST
indicator may not show up on the display, even though the sound can still be
heard via the headphones.
3
ENGLISH