Lea LE42196-74DW21 Manual De Instrucciones página 8

1. Install the rear support and tighten the
bolts.
Bolts M8×50
2. Install the rear attzchment support and
axle pin with the flat washer and then
insert the cotter pin into the axle pin.
3. Insert the Resistance rod into the support
and then tighten the bolt and nut.
4. install the inner blade L assy and inner
blade R assy and then insert the axle pin
into the blades and insert the cotter pin
into the axle pin.
5. install the outer blade L assy and the
outer blade R with Plasitic discs, and
then insert the axle pin into the blades
and insert the cotter pin into the axle pin.
6. install the outer blade cover on the right
side and tighten the bolts.
7. Unscrew the knob and open the belt
cover，then install the outer blade cover
on the left，screw bolts，at last close
the belt cover and screw the knob.
7