Lea LE42196-74DW21 Manual De Instrucciones página 17

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

CAUTION!
Problem
Fuel at the
carburetor
Fuel at the
The engine
stalls, is
difficult to
start or does
not start
Sparks at the
spark plug
electrodes
Sparks at the
spark plug
Check
Condition
The fuel
does not
arrive at the
carburetor
The fuel
does not
arrive at the
cylinder
cylinder
There is fuel
in the
exhaust
There is no
spark
There is no
spark
The gear housing must not be filled
completely with grease. The grease expands
as the machine heats up during operation. If
the gear housing was completely filled with
grease it could damage the seals and lead to
leakage of grease.
The grease in the bevel gear does not
normally need to be changed except if repairs
are carried out.
Repairs
Only an authorized service centre should
repair the machine.
Cause
Fuel filter blocked
Fuel supply
blocked
Carburetor
Carburetor
The fuel mixture is
too rich
Switch in off
position
Electrical problem
Locked switch
Bad spacing of the
electrodes
Electrodes
contaminated
16
Solution
Clean or replace
Clean or replace
Ask your distributor
for advice
Ask your distributor
for advice
Open the throttle
valve
Clean or replace the
air filter
Adjust the carburetor
Ask your distributor
for advice
Set the switch to the
ON position (Run)
Ask your distributor
for advice
Adjust the gap to
0,6-0,7 mm
Clean or replace
Tabla de contenido
loading

Tabla de contenido