Key To Symbols; Symbols On The Machine; Symbols In The Operator's Manual - Jonsered CS 2236 T Manual De Instrucciones

Symbols on the machine:

WARNING! Chain saws can be
dangerous! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the
machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European Community's
Directive. The machine's emission is
specified in the Technical data chapter
and on the label.
Use appropriate protections for foot-leg
and hand-arm.
This saw should only be used by
persons who are specially trained
in tree maintenance work. See
operator's manual!
Chain brake, activated (right)
Chain brake, not activated (left)
Air purge
Refuelling.
Adjustment of the oil pump.
2 – English

KEY TO SYMBOLS

Chain oil fill.
Working position.
Choke.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
Symbols in the operator's
manual:
Switch off the engine before carrying
out any checks or maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.
Refuelling.
Filling with oil and adjusting oil flow.
The chain brake must be engaged
when the chain saw is started.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches an
object, and cause a lightning fast reverse
reaction, kicking the guide bar up and
towards the operator. May cause serious
personal injury.