FUTURO AUTOFOCUS Manual De Instrucciones página 36

18
Icon
Note:
1) When the user clicks the
toolbar is fixed. In this case, the
mouse pointer is moved to the left side of the video window. Only when button
ment toolbar
camera control
2) When a specific measurement object is selected during the measurement process, the
on and attribute control bar
the properties of the selected object.
3) To ensure the accuracy of the measurement, click the button
camera sensor to the
after calibration is complete and the video is in focus.
4) If the calibration is complete but the camera sensor is not in the
Correction should be performed to reset the sensor to the C-mount default position and the video
should be focused before starting the measurement.
Function
Curve
Perform calibration to determine the appropriate relationship between magnification and
resolution, which provides the corresponding relationship between unit of measurement and
sensor pixel size. Calibration must be performed using a micrometer. The individual calibration
steps can be found in the software manual.
Conjugated Correction: Click
calibration. Next, manually adjust the microscope knob for the coarse and fine focus settings, in
order to focus the video. Make sure that the magnification in the software matches the magni-
fication of the microscope and then select the appropriate
Export the measurement data to a
Delete all measurement objects
Adjustment
Close the current measurement mode
Once the measurement is complete, click on a single measurement object to open the
position and property control
move up, move down, colour matching
Show / Hide button in
camera control panel
is clicked to exit the measurement mode can other operations be carried out in the
panel, the autofocus control panel
C-mount default position before calibration. Measurements can be started
to execute the Conjugated Correction
CSV file (*.csv)
bar. The icons in the control bar mean:
and delete.
on the measurement
does not open automatically, even if the
or the camera control
is displayed, which can be used to change the position and
Conjugated Correction
before performing a
unit of measurement.
Move left, move right,
toolbar, the measurement
in the
toolbar.
object positi-
to reset the
C-mount position, the Conjugated
object
measure-