Camera Control - FUTURO AUTOFOCUS Manual De Instrucciones

12
3.3.1 The camera control panel on the left side of the video window
Camera control panel
The camera is controlled via the
specific application. The control panel opens automatically when the mouse pointer is moved to the
left side of the video window (the
camera control panel
is moved to the left side of the video window). Clicking the button activates the Show / Auto Hide
button on the

camera control

Function Description of functions
Snapshot Record an image or take a
Video recording Record a video in the currently open video window.
When
Auto Exposure
the exposure time according to the
Available when the
Exposure compen-
adjust the
sation
ness and obtain the appropriate brightness value.
Available when the
Exposure time increase or decrease the exposure time to adjust the brightness of the
video.
Adjust the
Gain
reduced or amplified accordingly.
Move left or right to increase or decrease the red component in the
Red
video window.
Green Green
Move left or right to increase or decrease the
Blue
video.
White balance Automatic
Sharpness Adjust the
Noise reduction Adjust the
Saturation Adjust the
Correction of the
Gamma
left to decrease the gamma level.
Correction of the
Contrast
left to decrease the contrast.
For
DC
need to eliminate flicker.
Check
AC (50 HZ)
at 50 Hz.
Check
AC (60 HZ)
at 60 Hz.
Default settings All settings in the
camera control panel
camera control panel
only opens when the measurement process is finished, when the mouse pointer
panel;
snapshot
automatic exposure is enabled, the system automatically adjusts
automatic exposure
exposure compensation
automatic exposure
gain to increase or decrease the video brightness. The noise is
is a reference base and cannot be changed.
white balance according to the video window.
image sharpness of the video window.
noise reduction level of the video window
saturation level of the video window.
gamma level of the video. Move right to increase and
contrast value of the video. Move right to increase and
DC lighting, there is no fluctuation in the light source, so there is no
AC (50 Hz) to eliminate the "flickering" that occurs when lighting
AC (60 Hz) to eliminate the "flickering" that occurs when lighting
camera control panel
to achieve the best image quality for each
does not open in measurement mode). The
in the currently open video window.
exposure compensation value.
is enabled. Move left or right to
according to the current video bright-
is disabled. Move left or right to
blue component in the
are set to the default values.