Pioneer PDK-TS01 Manual De Instrucciones página 15

3. After assembling, connect the stand to the
floor to prevent from falling over.
Stabilizing to the floor
Use screws (sold separately) to attach and stabilize the
stand.
Installation coordinates for screws used to stabilize the stand to
the floor
* When stabilizing the stand to the floor, use M6 with a length above 20 mm (25/32 inch).
Units: mm (inch)
Specifications
Dimensions .............................. 566 (W) x 508 (H) x 339 (D) mm
Weight ...................................... 4.0 kg (8.82 lb)
..................................... 42.9 kg (94.58 lb)
1.
2.
Use cord and hooks that are available on the market (sold sepa-
rately).
485 (19-3/32) [50" display]
411 (16-3/16) [43" display]
248 (9-3/4)
(22-9/32 (W) x 20 (H) x 13-11/32 (D) in.)
(When the 50" plasma display is attached
35.5 kg (78.27 lb)
(When the 43" plasma display is attached
Sample use of the stabilization bolts
(50" display model is shown in the figure.)
Attach the stabilization bolts that come with the plasma
display.
Stabilize the display by connecting to a wall or standing
beam with a strong cord.
(Repeat the same steps in the laterally direction to stabi-
lize the assembly to the left and right.)
1
2
11.5 (29/64)
)
)
15