Detaching The Plasma Display From The Stand; Specifications; Dimensions Diagram - Pioneer PDK-TS15 Manual De Instrucciones

Detaching the Plasma Display from the Stand

To remove the Plasma Display from the stand, be sure
to always follow the procedure described below to
prevent accidents.
Caution
1
First clear a space on a flat floor etc. where
you can lay the Plasma Display flat, then
lay a sheet to protect it from scratches or
other damage.
2
Remove the speakers.

Specifications

External dimensions 1000 mm (W) x 309 mm (H) x 470 mm (D) (39-3/8 in. (W) x 12-5/32 in. (H) x 18-1/2 (D) in.)
Weight 10.2 kg (22.5 lbs)
• The above specifications and exterior may be modified without prior notice to improve the product.

Dimensions Diagram

Unit: mm (inch)
3
4
5
1470 (57-7/8)
1000 (39-3/8)
Referring to step 2 in "Attaching the
Plasma Display" (Page 10.), remove the
installation bolts (4 screws).
Holding the Plasma Display by its handles
at the bottom, with your other hand hold
the top, lift the display vertically.
Place the Plasma Display slowly onto the
sheet laid out in step 1 with its screen
facing downwards.
470 (18-1/2)
Published by Pioneer Corporation.
Copyright © 2006 Pioneer Corporation.
All rights reserved.
118 (4-21/32)
41 (1-5/8)
192.5
(7-19/32)
13
En