Thank you for purchasing double retractable 10 A test probes. These test probes
are designed for use with C.A. 6240 and C.A. 6250 microhmmeters.
For best results from your instrument:
read these operating instructions carefully,
comply with the precautions for use.
WARNING, risk of DANGER! The operator must refer to these instruc-
tions whenever this danger symbol appears.
The CE marking indicates conformity with the European LVD and EMC
directives.
The rubbish bin with a line through it indicates that, in the European
Union, the product must undergo selective disposal in compliance with
Directive WEEE 2002/96/EC.
Definition of measurement categories:
Measurement category IV corresponds to measurements taken at the source of
low-voltage installations.
Example: power feeders, counters and protection devices.
Measurement category III corresponds to measurements on building installations.
Example: distribution panel, circuit-breakers, machines or fixed industrial devices.
Measurement category II corresponds to measurements taken on circuits directly
connected to low-voltage installations.
Example: power supply to electro-domestic devices and portable tools.
The protection assured by the accessory can be compromised if it is used in a way
that is not recommended by the manufacturer.
Adhere to the assigned maximum voltage and intensity and measurement category.
Do not use your accessory on networks where the voltage or category exceeds
those stipulated.
Adhere to the conditions of use, that is to say temperature, humidity, altitude,
degree of pollution and location of use.
Do not use the accessory if it is open, damaged or incorrectly reassembled.
Any repairs must be carried out by skilled and approved personnel.
ENGLISH
PRECAUTIONS FOR USE
10