TFA Dostmann DIVA BASE Manual De Instrucciones página 52

they are not shown on the LCD after 60 seconds, remove the batteries and wait for at
least 60 seconds before reinserting them.
4. If the probe sensor has been installed to the first temperature transmitter, the outdoor
temperature readings from the first temperature transmitter (channel 1 and 2) should
then be displayed on the weather station. If this does not happen after 2 minutes, the
batteries will need to be removed from both units and reset from step 1.
5. Insert the batteries into the second temperature transmitter as soon as the outdoor
temperatures from the first temperature transmitter are displayed on the weather
station.
Note: Insert the batteries into the second transmitter within 20 seconds of reception of the
first temperature transmitter.
6. After the weather station has received the second temperature transmitter
successfully, channel 3 will only show the data, which will be measured by the internal
sensor of the second dual channel transmitter. The measuring data of the external
probe of the second temperature transmitter will not be shown on the display of the
weather station. The outdoor temperature reading from the second temperature
transmitter will be shown on the display of the weather station and the shown channel
number will be shift back to "1", to indicate that all three channels are running
successfully. If this does not happen within 2 minutes, the batteries will need to be
51