User's Manual; Safety Instructions - Defort DMS-1200 Instrucciones De Servicio

English
GB
MITER SAW

User's Manual

Intended use
This miter saw is designed for cross-cutting of timber and
plastic.
Do not use the saw to cut fi rewood, metal or masonry.
SPECIFICATIONS
Voltage:
Power input:
No load speed:
Saw blade
dimensions:
Cutting capacity
Weight:
DESCRIPTION
1. Safety lock
2. Handle
3. On/Off switch
4. Machine head
5. Saw blade
6. Hinged saw blade guard
7. Rear fence
8. Rotary table
9. Base plate
10. Lock screw
11. Wrench
12. Wrench
13. Bevel lock knob
14. Saw blade bolt
15. Saw blade cover
16. Lock pin
17. Screw
18. Chip extractor

SAFETY INSTRUCTIONS

• Do not use the saw to cut fi rewood, metal or masonry.
The tool must be used only for its prescribed purpose.
Any use other than those mentioned in this Manual will
be considered a case of misuse. The user and not the
manufacturer shall be liable for any damage or injury
resulting from such cases of misuse. The manufactur-
er shall not be liable for any changes made to the tool
nor for any damage resulting from such changes.
• Read the manual carefully before use or ensure that
the operator read it and is adequately trained in the
use, adjustment and operation of the machine.
10
230 V
1200 W
5000 min
-1
210х30х2.8 mm
miter 90°, bevel 90° - 120 х 50 mm
miter 45°, bevel 90° - 85 х 50 mm
miter 90°, bevel 45° - 120 х 22 mm
miter 45°, bevel 45° - 85 х 22 mm
7,5 kg
• Even when the tool is used as prescribed it is not pos-
sible to eliminate all residual risk factors. The following
hazards may rise in connection with tool's construction
and design.
- Contact with the blade.
- Kickback of workpiece and parts of workpiece.
- Blade fracture.
- Catapulting of blade pieces.
- Damage to hearing if effective ear defenders are not
worn.
- Harmful emissions of sawdust when the machine
is used in closed rooms. Beech and oak dusts are
especially detrimental to health and therefore may be
worked only with dust collector.
Always use supplementary dust extraction where pos-
sible.
Select saw blades in relation to the material being cut.
Dimensions of the blade must correspond with param-
eters of the tool, do not use any adapters. Do not use
blades of High Speed Steel (HSS blades), grinding/
cutting discs. Use only blades which conform to EN
847-1.
• Observe the maximum speed marked on the blade.
• Note the direction of rotation of the motor and the
blade. Saw blades shall be carried in a holder wher-
ever possible.
• Wear gloves when handling saw blades and rough ma-
terials.
• Make certain that the saw blade does not touch the
rotary table in any setting. To do so, pull out the power
plug and tilt the saw blade by hand into the 45° position
and the 90° position.
• Never use a cracked or distorted saw blade. Only use
sharp blades.
• Always remove the plug from the mains socket before
making any adjustments or maintenance, including
changing the blade.
• Do not slow or stop a blade with a piece of wood. Let
the blade come to rest naturally
• The use of any extension cord will cause some loss
of power. To keep power loss to a minimum and to
prevent tool overheating, use an extension cord that is
heavy enough to carry the current the tool will draw.
• When using extension cord on the reel, unwind it com-
pletely.
• Do not abuse power cord. Check it regularly. Never
use a faulty or damaged power cord.
• The machine must be connected to a 230 V socket-
outlet with a minimum 10 A fuse. When operating out-
doors, use residual current device (30 mA maximum).
• Do not operate in rain or snow, in humid places. Keep
your work area tidy. Rags, cloths, cord and string and
the like should never be left around.
• Ensure that there is adequate general or localized
lighting.
• Never saw near combustible liquids or gases.
• Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from mov-
ing parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
• Ensure that the machine is always fi xed to a bench,
whenever possible. Never operate your miter saw on
the fl oor or in a crouched position. Failure to heed this
warning can result in serious personal injury.
• Do not let anyone under 18 years old operate this saw.
Children should keep away from the operating saw.