Folding Frame - EMAK AC92-18 Manual De Usuario

(12) MOTOR HOURS COUNTER
The motor hours counter implicitly displays the total number of
motor hours. By pressing the Mode button you gradually switch
between the following maintenance functions:
TMR 1 - individual trip counter. The value is reset by
holding down the Mode button for 6 seconds.
OIL CHG - oil change. The function has two oil change
intervals. The first is after 5 hours (oil
change after the engine has run itself in) and
is shown only once. The second is after 25
hours (standard oil change).
AIRFILTER SVC - cleaning or changing the air filter. The interval
is set to 50 hours.
Two hours before the set interval has elapsed the display will
show a message lasting 10 seconds.
After the interval has elapsed the display will show the message
NOW.
Any of the above mentioned alarms can be reset by holding
down the Mode button for 6 seconds.
Tampering with the counter will void the warranty – the motor hours connection is equipped
with a tamper seal.
Immediately contact your service centre if the motor hours counter malfunctions.

(13) FOLDING FRAME

The folding frame is intended to prevent the machine from rolling over by 180° if for any reason it loses
stability and rolls on to its side. Under no circumstances does the protective frame serve as safety /
protection feature for the operator! The folding frame has 3 positions:
1. Work
2. Maintenance
3. Auxiliary for handling the machine
The individual positions are set using quick coupler levers on the sides of the frame.
(14) DIFFERENTIAL LOCK PEDAL
The pedal is used only if necessary and only when driving directly forward. It has two positions:
( )
( )
Use the lock only when driving directly forward and only if necessary (loss of
traction). Never use the differential lock when changing travel direction. Otherwise
there is a risk of serious damage to the transmission!
When the pedal is pushed down the lock is engaged.
When the pedal is released the lock is automatically disengaged.
26