Albatross Alba-Engine NMEA2000 Manual De Usuario página 9

Thus, the Alba-Engine interface
should be placed between the main
NMEA 2000 network and the
analogue gauges. This is because
you'll have to connect some wires
from the interface to the back of the
gauges and others to the NMEA
network.
Emmi network recommends putting
the Alba- Engine at a maximum
distance of 4 metres from the motor
sensors. The Alba-Engine interface
should be connected to the main
network at a maximum distance of 6
metres, although the user should
consider putting it as close to the main
NMEA network as possible to save in
cable costs.
Figure 2. Wiring diagram from the module to the motor
sensors
9