Albatross Alba-Engine NMEA2000 Manual De Usuario página 14

3.3.1 .2 Connection to a pressure or
temperature gauge
You'll need to unscrew the connector's nut in
these gauges and hook a new cable to be
connected to either the 4, 6, 8 or 10 inputs in
the Alba-Engine.
Gauge terminals
Tensión (+, +12V, I, IGN)
Ground (-, ⊥,G)
Sensor (S, G)
Figure 6. Wiring diagram of the module to a VDO
pressure or temperature analogue gauge.
Proposed cable
colour
Red
Black
Green
14