Conexión Al Bus Nmea2000 - Albatross Alba-Engine NMEA2000 Manual De Usuario

3.3. 4 Connection to NMEA 2000 bus
The Alba-Engine interface can connect to a NMEA 2000 bus through a 5- pin Micro- C connector.
You'll have to connect the Alba-Engine interface to the NMEA 2000 bus using a cable of the suitable
length from the module to a T-connector to the main network.
Make sure the cable is firmly connected and the connector's collar is screwed tight.
Illustration 1 Illustration 2
Male Female
connector connector
Figure 9. View of the NMEA
2000 Micro-C connectors
Pin 1: Protective Braid
Pin 2: NET-S. (Positive feed,
+V)
Pin 3: NET-C. (Common feed,
-V)
Pin 4: NET-H. (CAN-H)
Pin 5: NET-L. (CAN-L)
Data:
Blue: NET-H (CAN-H)
White: NET-L.(CAN-L)
External
protective
braiding
Figure 10. Inside view of a Micro-C cable
17
Feed:
Red : NET-S. Positive
feed, + V
Black: NET-C. Common
feed, -V