Cleaning And Caring For The Inverter - Dometic GROUP WAECO SinePower MSI912 Instrucciones De Montaje

SinePower
Switching to energy-saving mode
You can set the energy-saving mode using the S4, S5 and S6 dip switches.
In this way, the battery you connect to the inverter is not discharged as quick-
ly.
The inverter operates in energy-saving mode as long as the required power
is below the set level. If the required power exceeds the set level, the inverter
works in normal mode.
The values to be set on your inverter can be found in the following table:
Energy-saving mode
MSI900 MSI1300
Off
– <60 W
<70 W <130 W
<200 W <210 W
Defining settings
Using the S8 dip switch you can define whether the default settings or the
settings of dip switches S1-S7 are used.
Parameter
Default settings
Use dip switch S1-S7
11

Cleaning and caring for the inverter

A
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning
as these may damage the product.
➤ Occasionally clean the product with a damp cloth.
EN
MSI1800
Off Off
<110 W
<180 W
<220 W
Cleaning and caring for the inverter
Dip switch
S4 S5
Off Off
On Off
On On
On On
Dip switch
S8
Off
On
S6
Off
Off
Off
On
55