Control Elements - Dometic GROUP WAECO SinePower MSI912 Instrucciones De Montaje

Technical description
I
NOTE
The individual values are found in the chapter "Technical data" on
page 58.
The device can also be configured with a PC via an RS 232 interface and us-
ing the DIP switches on the device.
The inverter can be switched to an energy-saving mode to prevent the con-
nected battery from discharging too quickly.
The inverter can be easily controlled using the remote control (accessory).
The SinePower MSI1812T and SinePower MSI1824T inverters are fitted
with a 230 Vw priority circuit. If an external 230 Vw voltage is available, this
will have priority. If no external 230 Vw voltage is connected, then the con-
nected battery will be used as the power supply.
7.1

Control elements

The inverter has the following connections, displays and control elements on
the back:
No. in
fig. 5, Designation
page 4
1 Terminal
2 RS232 port,
REMOTE port
3 POS+
4 NEG–
5 Earth terminal
42
Description
Setup operation via remote control
Connection of a PC using a serial RS232
interface or connection of the MCR-7 or
MCR-9 remote control
Positive terminal
Negative terminal
Earthing on the vehicle bodywork
SinePower
EN