Velleman CAMWCONV Manual De Instrucciones

CAMWCONV – 2.4GHz WIRE TO WIRELESS CONVERTER
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
Thank you for buying the CAMWCONV! Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, don't install or use it and contact your dealer.
2. Accessories
• 2.4GHz wireless converter
• power cable for converter
3. Connection Diagram (fig. 1)
1. colour CCD camera
2. converter
3. adapter for converter adapter (not incl., use
PS1205R)
4. Description Wireless Converter (fig. 2)
1. antenna
2. BNC socket
3. channel switch
4. power jack
5. Installation
1. Connect the converter with a colour CCD camera through the BNC socket.
2. Connect the converter with the colour CCD camera using the power cable (either power jack will do).
3. Switch on the converter via the adapter of the colour CCD camera.
6. Channel Set-up of Converter
You could adjust the channel switch of camera to set the
channel for multi-camera working or avoiding the
interference. Please tune the channel switch at the back
to the desired channel (see fig.).
CAMWCONV_v2
0678
1 VELLEMAN