Resetting The Unit; Maintenance And Cleaning; Ec Declaration Of Conformity - Bresser MyTime Pro Instrucciones De Uso

RESETTING THE UNIT

In case of malfunction or abnormal display, remove the
batteries and unplug the AC/DC adapter. Then re-insert the
batteries and re-plug the AC adapter again. All settings will be
cleared and reset to their default values.

MAINTENANCE AND CLEANING

Before cleaning the device, disconnect it from the power
supply (remove plug and remove batteries)!
Only use a dry cloth to clean the exterior of the device. To
avoid damaging the electronics, do not use any cleaning fluid.
Protect the device from dust and moisture. The batteries
should be removed from the unit if it has not been used for
a long time.
DISPOSAL
Dispose of the packaging materials properly, according
to their type, such as paper or cardboard. Contact your
local waste-disposal service or environmental authority for
information on the proper disposal.
Do not dispose of electronic devices in the household
garbage!
As per Directive 2002/96/EC of the European Parliament on
waste electrical and electronic equipment and its adaptation
into German law, used electronic devices must be collected
separately and recycled in an environmentally friendly manner.

EC DECLARATION OF CONFORMITY

Bresser GmbH declares that the device (MyTime
Pro/Art.No.: 80-10030 and 80-10031) is in
accordance with applicable guidelines and corresponding
standards of the 1999/5/EG directive.
DE
GB
FR
IT
ES
19