Charging the battery
Your phone's battery should have enough power for the phone to turn on,
find a signal, and make a few calls. You should fully charge the battery as
soon as possible.
When the battery is low, a low-battery warning icon will pop-up on the
screen. As you charge your phone, the screen will tell you the exact battery
level each time you wake up your phone.
If the battery is extremely low, you may be unable to power on the phone
even when it is being charged. In this case, try again after charging the
phone for at least 10 minutes. Contact customer service if you still cannot
power on the phone after prolonged charging.
1. Insert the charger's connector into the charging port. Be sure to insert the
connector in the correct orientation. Do not force the connector into the
port.
2. Plug the charger into a standard AC wall outlet.
3. When the battery is fully charged, unplug the charger and disconnect it
from the phone.
8
Warning! Use only ALCATEL-approved chargers and cables. The use of
unapproved accessories could damage your phone.
Attempting to remove the battery could result in injury and will void your
warranty.
Do not attempt to disassemble, damage, alter or remove battery from device.
Extending the battery life
Active applications, screen brightness levels, Bluetooth
GPS functionality can drain your battery. You can follow the helpful tips below
to conserve your battery power:
• Reduce the screen backlight time.
• Lower the screen brightness.
• Turn auto-sync, Wi-Fi, and Bluetooth
• Disable the GPS function when not in use. Most applications using this
function will periodically query the GPS satellites for your current location;
each query drains your battery.
Powering your phone on/off
Make sure the micro-SIM card is in your phone and the battery is charged.
• Press and hold the Power key to power on your phone.
• To power it off, press and hold the Power key to open the options menu.
Tap Power off.
and Wi-Fi usage, and
®
off when not in use.
®
9