TFA Dostmann KLIMA-MONITOR Instrucciones De Uso página 10

TFA_No. 30.3054_Anleit_11_19
KLIMA-MONITOR – Wireless Thermo-Hygrometer
Caution!
Risk of injury:
• Keep these devices and the batteries out of reach of children.
• Batteries contain harmful acids and may be hazardous if swallowed. If a battery is
swallowed, this can lead to serious internal burns and death within two hours. If
you suspect a battery could have been swallowed or otherwise caught in the body,
seek medical help immediately.
• Batteries must not be thrown into a fire, short-circuited, taken apart or recharged.
Risk of explosion!
• Low batteries should be changed as soon as possible to prevent damage caused
by leaking. Never use a combination of old and new batteries together, nor batter-
ies of different types.
• Wear chemical-resistant protective gloves and safety glasses when handling leak-
ing batteries.
Important information on product safety!
• Do not place your product near extreme temperatures, vibrations or shocks.
• Protect it from moisture.
• The transmitter is protected against splash water, but is not watertight. Choose a
shady and dry position for the transmitter, when used outside.
5. Components
Basic station (Receiver)
A: Display (Fig. 1):
Display 1, 2 and 3 for transmitter 1-3
A 1: Channel number with reception and battery symbol
A 2: Temperature
A 3: Temperature tendency indicator
A 4: Hi-/low-alarm for temperature
A 5: Comfort level symbol
A 6: Humidity
A 7: Hi-/Low-Alarm for humidity
A 8: Marking for selected channel
A 9: Symbol for MAX/MIN
18
09.11.2019 9:59 Uhr Seite 10
KLIMA-MONITOR – Wireless Thermo-Hygrometer
Display IN for internal sensor and transmitter 4-8
A 10: Display for internal sensor and transmitter 4-8
B: Buttons (Fig. 1):
B 1: MIN/MAX / – button
B 2: ALARM / SET button
B 3: CHANNEL / + button
C: Housing (Fig. 2):
C 1: Stand (fold out)
C 2: Battery compartment
D: Transmitter (Fig. 3):
Housing front:
D 1: Transmission signal lamp
Display:
D 2: Channel number
D 3: Temperature and humidity
Housing back side:
D 4: Wall mounting hole
D 5: Battery compartment
Inside the battery compartment:
D 6: Switch 1, 2, 3 and 4
6. Getting started
• Place the instruments on a desk with a distance of approximately 1.5 meter. Avoid
getting close to possible interference sources (electronic devices and radio instal-
lations).
6.1 Installation of the transmitters
1. Open the screwed battery compartment of the first transmitter.
2. Slide down for the first transmitter the first, the second and the third switch.
3. Slide up the fourth switch to select temperature display in °C (Celsius) or slide
down to select °F (Fahrenheit) as the temperature unit.
19