Product Description And Specifications - Bosch PSS Serie Manual Original

OBJ_BUCH-60-005.book Page 11 Monday, May 6, 2013 10:04 AM
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Keep your workplace clean. Blends of materials are par-
ticularly dangerous. Dust from light alloys can burn or ex-
plode.
 Never use the machine with a damaged cable. Do not
touch the damaged cable and pull the mains plug when
the cable is damaged while working. Damaged cables in-
crease the risk of an electric shock.
Products sold in GB only: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Technical Data
Orbital sander
Article number
Rated power input
Preselection of orbital stroke rate
No-load speed
No-load orbital stroke rate
Orbit diameter
Sanding sheet dimensions
— Adhesion via Velcro backing
— Attachment via clamping
Weight according to EPTA-Procedure
01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 82 dB(A); Sound power level 93 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2 2
a =5.5 m/s , K=1.5 m/s .
h
Bosch Power Tools
Intended Use
The machine is intended for dry sanding of wood, plastic, filler
and coated surfaces.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page. 1 Thumbwheel for orbit frequency preselection
(PSS 250 AE)
2 On/Off switch
3 Dust box, complete (Microfilter System)
4 Sanding-sheet clamp
(PSS 190 AC/PSS 200 AC/PSS 250 AE)
5 Sanding plate
6 Sanding sheet
7 Handle (insulated gripping surface)
8 Extraction outlet
9 Filter element (Microfilter System)
10 Vacuum hose*
11 Perforating tool*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
PSS 190 AC PSS 200 A
3 603 ... C40 1..
W 190
–
-1
min 12000
-1
min 24000
mm 2.0
mm –
mm 93 x 230
kg 1.6
/II
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
PSS 200 AC
C40 0.. C40 1..
200 200
– –
12000 12000 7000 – 12000
24000 24000 14000 – 24000
2.0 2.0
93 x 185 –
– 93 x 230
1.6 1.6
/II /II
1 609 92A 06H | (6.5.13)
English | 11
PSS 250 AE
C40 2..
250

2.0
93 x 185
93 x 230
1.6
/II