Calculation - Pentax R-100 Serie Manual De Instrucciones

8.4.3 Calculation

Select 3.FIXED CALC. or 4. CLOSED or 5.OPEN CALC. to calculate the traverse route.
And press the [ENT] key to view the START POINT COORD. SETUP screen.
Start point coordinates setup
(Input the PN, Coordinates and PC of the Start point.)
[LIST] key
All the stored points can be displayed as follows by pressing [F2][LIST].
Press [F2][LIST] to view the POINT SELECTION FROM THE LIST screen.
Press the [ENT] key to open the X coordinate input screen.
Input your desired value by pressing the each arrow key and press the [ENT] key to go
Y coordinate.
Press the [ENT] key to open the Y coordinate input screen and input.
TRAVERSE
1. START POINT MEAS.
2. CORNER POINT MEAS.
3. FIXED CALC.
4. CLOSED CALC.
5. OPEN CALC.
START POINT COORD. SETUP
1. X:
2. Y:
3. Z:
LIST
POINT SELECTION FROM THE LIST
1 / 15
PN:POT1
X: + 00000100.000 m
Y: - 00000200.000 m
Z: + 00000010.000 m
DELETE FIND PN
START POINT COORD. SETUP
1. X: + 00000000.000m
2. Y:
3. Z:
START POINT COORD. SETUP
1. X: + 00000000.000m
2. Y:
3. Z:
85
ACCEPT
CLEAR
CLEAR