Corner Point Measuring - Pentax R-100 Serie Manual De Instrucciones

Press the [ENT] to save the measured data as
If [ENT] is pushed more than twice at the one station, the last [ENT] point becomes next corner
point.
Note
Please use [SAVE] [ME/SAVE] and [ENT] properly by sideshot and corner point.
Press [F5][PAGE] to view another menu.

8.4.2 Corner point measuring

Select 2.CORNER POINT to start measuring at corner point.
And press [ENT] key to view the STATION POINT SETUP screen.
Press the [ENT] Key to view the AIM AT THE REFERENCE POINT screen.
Aim at the previous station, then press [ENT] key.
The direction angle is set automatically.
It proceeds to MEASURE screen automatically.
corner point
MEASURE
PN POT100
PH 0.500 m
H.angle xxx° xx' xx"
V.angle xxx° xx' xx"
S.dst xx.xxx m
EDM TARGET
TRAVERSE
1. START POINT MEAS.
2. CORNER POINT MEAS.
3. FIXED CALC.
4. CLOSED CALC.
5. OPEN CALC.
STATION POINT SET UP
PN POT2
IH 0. 000m
AIM AT THE REFERENCE POINT.
Aim at the reference point
Press [ENT] when ready.
ESC
83
PAGE
ACCEPT
ENT