Safety Instructions; General Safety; Operating The Device Safely - Dometic GROUP WAECO PocketPower SI102 Instrucciones De Uso

PocketPower SI102
2

Safety instructions

2.1

General safety

WARNING!
!
 Only use the connection cable to connect the device to the 12 V cigarette
lighter or the 12 V onboard socket in the vehicle.
 Do not connect the 230 V output of the inverter to a different 230 V source.
 Always disconnect the power supply when working on the inverter.
 Note that even after the fuse triggers, parts of the inverter remain live!
 Never pull the plug out of the 12 V vehicle socket by the cable.
 If the cable is damaged, it must be replaced to prevent possible electrical haz-
ards.
 Do not operate the device if it is visibly damaged.
 People (including children) whose physical, sensory or mental capacities or
whose lack of experience or knowledge prevent them from using this product
safely should not use it without the supervision or instruction of a responsible
person.
 This device may only be repaired by qualified personnel. Inadequate repairs
can cause considerable hazards.
 Disconnect the connection cable:
– Before cleaning and maintenance
– After use
 Ensure that the ventilation slots are not covered.
 Keep the inverter out of the reach of children.
2.2

Operating the device safely

WARNING!
!
 Electronic devices are not toys!
Always keep and use the device well out of the reach of children.
 When using the device in a vehicle, make sure that it does not impair opera-
tion of the vehicle.
 Before starting the device, ensure that the power supply line and the plug are
dry.
 Never start the device when your hands are wet.
 Only operate the device when you or another person can attend to it.
 Do not operate the device on hot surfaces.
 Do not operate the device near flames or other heat sources (heating, direct
sunlight, gas ovens etc.).
 Never immerse the device in water.
 Protect the device and the cable against heat and moisture.
 WAECO cannot be held liable for damage resulting from improper usage or
incorrect operation.
EN
Safety instructions
11