Troubleshooting - Renfert Vortex compact 2 L Instrucciones De Servicio

5. Troubleshooting

Problem
≠ Motor does not start
≠ Motor does not run in
automatic mode
≠ Reduced suction power
≠ No suction power during
wet cleaning
8
Cause
> Plug of mains lead not
inserted
> Fuse of mains plug sok-
ket has blown
> Overload protection
switch has tripped
> Electric tool defective or
not properly connected
> Bag-type filter full
> Suction hose clogged
> Filter element clogged
> Tank full (float switch
closing off the suction
opening)
Remedy
 Insert main lead plug
into plug socket
 Reset the fuse
 Allow the cleaner to cool
down for approx. 5 mi-
nutes; if the cleaner does
not start again automati-
cally, contact the Service
Dept.
 Check function of elec-
tric tool or push in plug
firmly
 Replace bag-type filter
 Clean suction hose
 Clean or replace filter
element
 Empty tank