Edesa HC1 Serie Manual De Instrucciones página 78

OVEN WITHOUT HOT PLATE CONTROLS
The dimensions of the ventilation
cut-outs in the kitchen units must
be as shown in the figures, for
high or low mounted units.
It is very important to maintain
adequate ventilation cut-outs at
the back in order that the oven
operates correctly.
The electrical connection must
be made using the hose "A".
The appliance and electrical
supply socket must be correctly
earthed.
If using a cooker panel; a switch
must be fitted, to disconnect all
three phases, with minimum a 3
mm separation between
contacts.
Once plugged in, fit the oven into
the unit, taking care not to leave
excess cable lying on top of the
oven. Do not stand the oven on
the supply cable.
Fix the oven to the unit with 4
screws (in the oven accessories
bag).
NOTE: If the oven is to be installed without a surrounding unit, a mounting kit is
available as a chargeable accessory, and which includes installation instructions.
INSTALLATION
77
A
A