What To Do If - Edesa HC1 Serie Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 4
THE OVEN DOES NOT SWITCH ON
- Fuse blown. Replace them it.
- If the fuses blow again, too many devices may be running.
- If the oven still does not work, call Technical Service.
LIGHT DOES NOT WORK EVEN THOUGH THE OVEN IS ON
- Probably the light bulb has blown. When the oven is cold, unscrew the lamp
cover, remove the bulb and replace it with another ensuring the
replacement bulb is capable of operating at 300º c (Switch off at the mains
first, for safety reasons).
THE OVEN FILLS WITH SMOKE COMING FROM THE OVEN ITSELF.
- All ovens produce smoke to a greater or lesser extent, especially when
roasting.
You can decrease the volumen of smoke by reducing the amount of fat in the
tray and by using the oven at a slightly lower temperature.
Do not use temperatures which are higher than those given in the guide
tables.
- The grill element may be dirty, with grease from a previous roast.
When the grill is switched on, this grease will be burnt and a great deal of
smoke will be created for a few minutes (keep the oven door closed). Try to
keep the grill clean.
If the above does not help to solve the problem, contact the authorized
technical service. You will be asked for a series of questions about data
particular to your oven, which appears on the data plate or guarantee card
supplied with the oven.
Note these references here in case you need them.
SERIAL NUMBER:
The Technical Service Department can use this information to process your
query so that the problem can be resolved on the first visit, thus saving time
and costs by eliminating the need for several visits.

WHAT TO DO IF...

75
REFERENCE:
Tabla de contenido
loading

Este manual también es adecuado para:

Hc2 serieHc1105

Tabla de contenido