Portamate PM-8000 Manual Del Operador página 9

Rotating the table:
1. When rotating the saw down into
the storage position, use caution to
prevent the saw from rotating too
quickly as this could cause damage to
your saw
2. Hold the table in place, then pull the
black levers on the side till they are
vertical
3. Hold the saw, rather than the table
(3a), as you rotate it down into the
stored position (3b)
4. When the table is flush to the top of
the side frame, push down on the
levers to lock into place
Follow all saw manufacturers warnings and instructions
2
3a
4
9
3b