Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Assembly Instructions
Tools Required: Phillips screwdriver, tape
measure, adjustable wrench, straight edge
1. Assemble hardware on side frame
a. Fully insert locking knob "
clockwise until pins snap into place
b. Fully insert levelling feet "
lined up on the bottom, attach them using
levelling foot screws "
c. Slide washer "
the axle, slide the cotter pin "
the hole in the axle, and snap hub cap
"
" into place
d. Repeat process on the opposite side frame
2. Connect the side frames using bottom braces,
a 4mm allen key is provided for this task
a. Attach front brace "
4 M6x12 bolts "
b. Attach back brace"
8 M6x12 bolts "
2
", twist
" until holes are
"
" and wheel "
" onto
" through
" using
"
" using
"
1
4
Tabla de contenido
