Portamate PM-8000 Manual Del Operador página 6

Instructions for Use
To lower the handle:
1. Rotate locking knob counterclockwise
to unlocked position
2. Depress pins, slide handle down
3. Rotate knob clockwise to lock
To raise the handle:
1. Rotate locking knob counterclockwise
to unlocked position
2. Pull handle up until pins snap into
place
3. Rotate knob clockwise to lock
Mounting your saw:
1. Measure the distance between the
front and back mounting holes on
your saw
2. Adjust the tool mounts in the top table
(2a), once they're in place, tighten the
bolts to prevent them from moving
(2b)
3. Slide carriage bolts into the slots in
the tool mounts
4. Place saw on the top table, slide the
carriage bolts through the mounting
holes on your saw
5. Slide a flat washer, lock washer, and
nut onto each bolt and tighten it
down securely
1
3
1
2b
4
6
2
2a
3
5