Heat Function; Light Function; Cleaning And Maintenance - Beurer stress releaZer Instrucciones De Uso

Press four
times
Press five
times
Note
You can also switch off the stress releaZer, regardless of the setting, by
pressing and holding down the ON/OFF button.
Note
The stress releaZer features an automatic switch-off function, which is set to
the maximum operating duration of 30 minutes. After 30 minutes, the stress
releaZer switches off automatically.

6.3 Heat function

You can switch on a soothing heat during use to increase relaxation. To do
this, press the heat button
to glow blue. Press the heat button

6.4 Light function

You can also switch on a blue light during use to increase relaxation. To do
this, press the light button
around the stress releaZer will now start to pulse in time with the user's
breathing rhythm. Press the light button
When the light function and the heat function are both switched on, the illu-
minated ring will glow red, not blue.

7. Cleaning and maintenance

The service life of the stress releaZer depends on careful use.
IMPORTANT
• Clean the stress releaZer after every use using a soft, slightly damp cloth
(water or a mild cleaning solution). Dry the stress releaZer using a lint-free
cloth. Do not use any abrasive cleaning products.
The third breathing cycle is activated. In this breathing
= cycle, breathe in for 7 seconds, and then breathe out
for 7 seconds.
= The stress releaZer is switched off.
on the stress releaZer. The function light starts
on the stress releaZer. The illuminated ring
again to switch off the heat.
again to switch off the blue light.
24