Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English
MEANINGS OF SYMBOLS
NOTE: Some units do not carry them.
Symbols
The following show symbols used for the machine. Be sure that you understand their
meaning before use.
It is important that you read, fully
understand and observe the
following safety precautions and
warnings. Careless or improper
use of the unit may cause serious
or fatal injury.
Read, understand and follow all
warnings and instructions in this
manual and on the unit.
Always wear eye, head and ear
protectors when using this unit.
Gloves should be worn when
necessary, e.g., when assembling
cutting equipment.
Use anti-slip and sturdy footwear.
Do not touch the blade when
running the engine.
Choke – Run position (Open)
Choke – Start position (Closed)
Emergency stop
Hot surface
Before using your machine
• Read the manual carefully.
• Check that the cutting equipment is correctly assembled and adjusted.
• Start the unit and check the carburetor adjustment. See "MAINTENANCE".
Index
WHAT IS WHAT ..................................................... 3
WARNINGS AND SAFETY INSTRUCTIONS ....... 4
SPECIFICATIONS ................................................. 6
2
WARNING
Keep all people, bystanders and
helpers 50 ft (15 m) away from
the unit. If anyone approaches
you, stop the engine and cutting
attachment immediately.
High-voltage current runs through overhead
electric cables and communication cables, etc.
Under no circumstances must the trimmer come
into direct or indirect contact with these cables
during usage. The trimmer is not electrically
insulated, so failure to observe this may result in
serious injury or death.
Make sure all trimming work is carried out at
least 33 ft (10 m) away from such cables.
ASSEMBLY PROCEDURES ................................. 7
OPERATING PROCEDURES ............................... 8
MAINTENANCE .................................................. 10
Capítulos
Tabla de contenido
