Technical Specifications - HQ-Power ARCHITECTURAL CITY COLOR 1200 Manual Del Usuario

Replacing the Fuse
Only replace the fuse by a fuse of the same type and rating.
1. Before replacing the fuse, switch off the device and unplug the mains lead.
2. Unscrew the fuse holder with the appropriate screwdriver.
3. Remove the old fuse and install the new fuse in the fuse holder.
4. Replace the fuse holder in the housing and tighten it.
8.

Technical Specifications

power supply
power consumption
luminous flux
LEDs
projecting distance
beam angle
ingress protection degree
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device. For more info concerning this
product and the latest version of this manual, please visit our website www.hqpower.eu. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
V. 01 – 24/03/2015
VDPLOW1208
110-250 V~, 50-60 Hz
600 W
33350 lm @ 1 m
120 x 8 W RGBW
10 m
45°
IP65
650 x 670 x 580 mm
30 kg
8 ©Velleman nv