For Your Child's Safety; Height Adjustment - Rotho TOP Xtra Instrucciones De Montaje

Kit de baño
Ocultar thumbs Ver también para TOP Xtra:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 7
SET UP AND INSTRUCTIONS FOR USE

FOR YOUR CHILD'S SAFETY

Caution! Read these instructions through carefully and store then for later reference.
When passing the product on to a third-party, always include the instructions. (Download: www.rotho-babydesign.com).
WARNING – DROWNING HAZARD!
This product is a bathing aid and does not provide additional safety with regard to the risks associated with water!
Children have drowned while bathing.
Children can drown in as little as 2 cm (1 inch) of water in a very short time.
Always remain in contact with your child during bathing.
Never leave your baby unattended in the bath, even for a few moments. If you need to leave the room, take the baby with you.
Risk of scalding! Check the temperature of the water (maximum 37° C / 99°F). Keep the child away from the water tap!
Before bathing, make sure that the product is positioned correctly and safely!
Do not use if the product is defective, if there is a part missing or borken - Risk of injury!
Use only original replacement parts from Rotho Babydesign.
The product may not be used or operated by persons (e.g. children) with restricted physical, sensory or mental capabilities or a lack of knowledge!
Use only the compatible accessories:
• Bathtub stand TOP Xtra item number 20501 with TOP Xtra bathtub item number 20500, TOP Xtra bathtub insert item
number 20503 and drainage hose item number 20069 (these components are already included in the bathing station TOPxtra item number 21041)
• Bathtub stand TOP item number 20502 with TOP bathtub item number 20001, TOP bathtub insert item number 20503
and drainage hose item number 20069 (these components are already included in the bathing station TOP item number 21042)
The bathtub can be used on the stand up to when the child tries to stand up by itself.
Maximum load (bathtub + water + child): TOP 25 kg/ TOP Xtra 50 kg
Clean the product with a soft cloth and soapy water. Do not use aggressive or scouring cleaning agents or scouring cloths/sponges.
These may damage the product.
Intended and correct use
The bathtub stand is designed to accommodate the TOP / TOP Xtra baby bathtub from Rotho Babydesign item number 20001 / 20500.
We do not accept liability if the stand is used with another baby bathtub or with accessories that are not original parts.
Before use, make sure that the bathtub is seated securely on the stand.
Assembly instructions
Mount both crossbars (towel rail) each with the right and left sides in the two white plastic trays. To mount, briefly press in each securing pin
and guide the crossbar into the mounting hole provided on the tray. Make sure the securing pin clicks into place on each side (Figure 1).
To fit the feet, push the securing pin in and guide the foot into the appropriate mount, until the securing pin engages audibly (Figure 2).
Caution: Risk of tipping! All four feet must be engaged at the same setting! If a securing pin is not functional due to damage, do not continue
using the stand. If the child is able to draw themselves up, kneel or pull themselves up, the product may no longer be used with the vertically fitted legs.
Use the bathtub stand combination on the floor (Figure 5). This ensures that the bathtub has a high level of stability and makes it harder for the bathtub
to tip over during bathing. The bathtub and bathtub insert are placed in the bathtub stand in accordance with Figure 3.

Height adjustment

The height is adjusted by pushing in the securing pin and sliding to the correct position (Figure 4).
Caution: Risk of tipping! All four feet must always be in the same position.
Storage - Removing the feet
You may remove the feet in order to store the bathtub stand in a space-saving manner. This is easier to do if you turn the stand upside down
with the feet facing upwards (Figure 4). Pay attention to choose a gentle surface in order to not damage the stand. Press the securing pin in
and pull the foot from the mount. The feet can then be clicked into the provided mounts on the inside of the stand (Figure 5).
Notes regarding disposal
Please ensure that the packaging and items are sorted and disposed of in an environmentally friendly way! Dispose of the items via an
authorised disposal company or via your town's community administration. Please pay attention to the applicable legal regulations.
Tabla de contenido
loading

Este manual también es adecuado para:

Top21041210422050120502

Tabla de contenido