Char-Griller E3072 Manual De Instrucciones De Uso página 21

Step 12: Install the Burners into the Grill Body by inserting the IGNITER WIRES and
Burners through the open holes at the front of the Grill Body from inside of the Grill
Body, see figure 12A. (NOTE: IGNITER MUST BE ON BOTTOM SIDE OF BURNER). The
BURNER with the longer wire goes on the right side of the GRILL BODY. Making sure
that the Valve goes inside each burner, see figure 12B. Then secure the Burners to
the Grill Body with the screws provided, see figure 12C.
Figure 12A
Burner
Figure 12B
OME3072 E.2
Igniter with Wire
Valve
™ & © Char-Griller / A&J Manufacturing
Burner
Screw
Burner
Figure 12C
11