Ac Network On; Main Page; Ac Network Page - Cristec YPO-DISPLAY-R Manual Del Usuario

4.3 AC
NETWORK ON
4.3.1 Main page
The battery charger starts up automatically when AC network is present.
Consequently, the display shifts to the main page shown below. It is possible to display channel E, 1 and 2
voltages by pressing [1].
8
7
6
4.3.2 AC Network page
AC Network voltage and frequency are available by pressing AC network status [6] onto main page.
3
Voltage waveform distortions caused by harmonics can impact the measurement.
5
2
1
2
3
4
1
1 : Battery channel and name
2 : Total charger's output current
3 : Charge status
4 : Access to parameters
5 : ON/OFF charger output
6 : AC network status
7 : Battery pack temperature (if probe
connected)
8 : Battery channel voltage
1 : AC Network frequency in Hertz
2 : Home (return to main page)
3 : AC Network voltage in Vac
22