Num'axes PIE1045 Manual De Instrucciones página 26

- The LCD screen will turn off automatically after approximately 2 minutes. Press any
button on the device and the screen will turn on again. The connection success
message will be displayed as shown below:
- Open the PIE1045 application and click on the connection button.
- On the application, the photos/videos taken can be previewed, saved, downloaded or
deleted.
7.4. WIFI disconnection
- Press and hold the  button on the device for approximately 3 seconds to deactivate
WIFI. The camera will automatically return to the SETUP mode.
- Press the OFF button on the remote control to deactivate WIFI. The camera will
automatically return to the SETUP or ON mode.
- After using the application, select "Exit WIFI" in the last item of the menu to
deactivate WIFI. The camera will automatically return to the SETUP or ON mode.
- When the camera is in ON or SETUP mode and the application is no longer used, if
you forgot to deactivate the WIFI, the camera will automatically disconnect it after 1,
2 or 3 minutes (depending on the setting of the "WIFI auto OFF" parameter) and will
return to ON mode or SETUP mode.
PIE1045 - Indice B – Mars 2020
PIE1045
CAMERA
ALBUM
26/76