Num'axes PIE1045 Manual De Instrucciones página 23

Time Lapse
Working timer
Audio recording
Time / Date
Time format
PIE1045 - Indice B – Mars 2020
ON / OFF
Programmable from 00:00:03 to 23:59:59.
With "Time Lapse" ON, the camera will capture photos or videos
automatically at a preset time interval regardless of whether
motions are detected or not.
WARNING: when the Time Lapse function is set to ON, the PIR
sensors are deactivated.
Select "ON" then press "OK" to set the interval; the camera will
capture photos/videos automatically upon the user set interval.
Example: if Time Lapse is set to 00:30:00, the camera will
automatically capture photos/videos every 30 minutes.
ON / OFF
The camera can be set to take photos/videos only at a certain time
of the day (2 independent time slots can be defined). Each day, the
camera will work only during the user set time periods. The rest of
the time, the camera will be in stand-by and will not work.
Select "ON" then press "OK" to set the start time and end time of
the desired working periods.
Timer 1 - Start
Timer 1 - End
Timer 2 - Start
Timer 2 - End
Example: If "Timer 1 - Start" is set to 15:00 and "Timer 1 – End" is
set to 18:00; the camera will work only between 15h00 (03:00 PM)
and 18h00 (06:00 PM) each day.
This function can be set to "OFF" which means the camera works
all day.
ON / OFF
Allows you to activate or deactivate the audio recording on the
videos.
20/11/2019
15:57
DD/MM/YY
NOTE: it is important to set the date and time to ensure some
functions work as expected (for example: time stamp on the
photos, operation during a defined time period).
24 hours 12 hours
00:00
00:00
00:00
00:00
23/76