Power ON/OFF
•
Press the [
] (5) to turn ON.
q
•
Press [
] (5) again to turn OFF.
q
Battery charging
The device has a built-in rechargeable battery. The unit is provided with a USB-to-Micro USB
cable. Connect the USB to a 5V USB port and the other end to the DC-in of the unit (9). While
charging, the indicator will light up and will turn OFF when fully charged.
The unit will operate without the charging cable using the internal battery.
The battery discharge depends on the use of it. E.G: Heavy, loud, bass music will use more
energy to produce than spoken word.
Bluetooth connection
•
Turn the speaker ON.
•
The speaker is automatically in Bluetooth mode (LED is flashing quickly in blue).
•
Set your Bluetooth device to 'Search' using the devices' Bluetooth menu.
•
Choose 'HPG333BTL_CALIBER' from the list. If required, confirm the pairing with the
passkey: "0000".
•
When the devices are paired successfully, a sound will be heard and you can start playing
music on your device. If your device supports AVRCP you can use the buttons on the HPG
to control the playback.
Playing from micro SD card
•
Turn the speaker ON.
•
Insert a micro SD card into the slot, the stored music will be played automatically.
•
While playing, short press [ ] or [ ] (2/3) to select the previous or next song.
AUX-IN:
For the optional wired connection you can connect an external device e.g.
MP3 player to the AUX-in of the HPG using the provide jack-to-jack cable.
•
Turn the speaker ON.
•
Use the provided 3.5mm jack-to-jack cable or another cable with a 3.5mm jack plug, to
connect an external device to the AUX-in (7).
•
The HPG will go into AUX mode automatically.
•
To control the playback, use the controls on your external device.
Note: The playback control buttons on the HPG will not work in this mode.