sanindusa 541057111 Instrucciones De Montaje página 48

//MAINTENANCE
Filter cleaning instructions
This flush valve is provided with a stainless steel filter preventing foreign particles to enter the lines. If the
water flow has decreased, this may be because the filter is clogged. The filter can be cleaned as follows:
1 - Turn off the regulating valve
2 - Disassemble the solenoid valve by opening the nuts
3 - Remove the filter and wash it under running water
4 - Reassemble the filter
5 - Reassemble the solenoid valve
6 - Turn on the regulating valve and adjust the flow capacity
7 - Make sure that there is no water leakage
Care and cleaning of chrome and special finishes
.
DO NOT use steel wool or cleansing agents containing alcohol, acid, abrasives, or the like. Use of any
prohibited cleaning or maintenance products or substances could damage the surface of the flush valve.
For surface cleaning use ONLY soap and water, then wipe dry with clean cloth or towel. When cleaning
bathroom tile, the flush valve should be protected from any splattering of harsh cleansers.
48 49
//