sanindusa 541057111 Instrucciones De Montaje página 47

When the battery weakens, the LED indicator light will blink at a
constant rate. The battery must be replaced within two weeks.
To replace the battery:
1 - Release the screw at the bottom of the cover plate and
remove the cover plate
2 - Disconnect the waterproof connector between the battery
box and the electronic unit
3 - Pull out the battery box from the battery box holder by relea-
sing the bottom clip
4 - Pull out the battery cover
5 - Replace the used battery with a new 9V battery (Lithium
battery is recommended)
6 - Close the battery box and slide it back on the battery holder
starting from the bottom upwards
7 - Connect the connectors
IMPORTANT: Wait a few seconds before activating the flush
valve to avoid entering into settings adjustment
8 - Close the battery compartment and refit the cover plate
//BATERRY REPLACEMENT INSTRUCTIONS
1
2
5
8
.
.
3 4
6 7